Description
B-COMPAQ IFIX, OUR SAFEST NEXT GENERATION COMPACT CAR SEAT
Britax next generation range offers parents a selection of child seats that deliver on aesthetically beautiful design, safety, comfort and innovation. As safety leaders, we are here for all your firsts, seconds and growing family needs.
Visit our store to see this product set up on display.
B-compaq ifix is a beautiful compact car seat with closed protective shell design. The perfect solution for small cars and growing families needing more space, with user-friendly ease of use, safety, and comfort.
B-compaq ifix fits your life.
Type A4/B Convertible Car Seat (Birth to 4 years approx.)
REARWARD FACING INSTALLATION (Birth to 2-3 years approx.)
FORWARD FACING INSTALLATION (12 months to 4 years approx.)
COMPACT DESIGN
Perfect for cars with small rear seating space (easy fitment in small cars where the front seats are in close proximity to the back) and 3 across the back for growing families.
PROTECTIVE SHELL
The enclosed shell design provides enhanced shielding to ensure the child is contained within the protective elements of the child seat. A protective barrier between the child and
the vehicle.
ADVANCED TORSO SIDE IMPACT CUSHION TECHNOLOGY (SICT)
Advanced SICT is a deployable safety innovation with crumple zone technology. Located on the torso, the unique design combines advanced safety and freedom of space.
REARWARD FACING LEVEL INDICATOR
Visual level indicator designed to aid correct rearward installation angles. Full or partially visible, the level indicator offers you an optimal range during installation.
HASSLE FREE HARNESS™
Now with frontal easy adjust, the headrest height can be adjusted with ease, without uninstalling the seat.
VENTILATION ZONES
Located in the rear interior and exterior of the seat, the zones offer improved airflow and increased comfort to your child in rearward facing.
COMFORT WITHOUT COMPROMISE
Generous internal seating area and comfortable trim padding with additional cushioned insert.
THERMO5® WITH NANOTEX® SPILL PROTECTION
Stain resistant and moisture repellent properties combined with Thermo5® High Performance fabric makes it easy to clean on the go.
ISOFIX COMPATIBLE WITH ISOFLEX® LATCH
The frontal easy adjust headrest can be height adjusted without uninstalling the seat.
EASE OF USE
EZ-BuckleTM crotch insert enables ease of entry into the seat, while helpful holders store harness buckles, providing comfort for your child’s journey.
| Suitability | From birth to 4 years (approx.) |
|---|---|
| Rearward Facing | From birth to 2-3 years (approx.) |
| Forward Facing | From 12 month to 4 years (approx.) |
| Rearward Facing | H: 450mm W: 375mm D: 520mm |
| Forward Facing Upright | H: 685mm W: 450mm D: 425mm |
| Lower Height Marker | 350mm |
| Transition Height Marker | 390mm |
| Upper Height Marker | 435mm |
| Seat Weight |
9.9kg
|
FAQ
EASE OF USE
WILL THE B-COMPAQ FIT 3 ACROSS BACK LIKE GRAPHENE?
B-Compaq ifix is our safest most compact car seat. It is designed to be short in rearward facing depth even in the smallest vehicles and also allow for side-by-side seat fitment. We understand that not all cars are the same, and have the tightest of spaces, you may consider Graphene or Brava for ultra-tight fits.
WHAT IS DIFFERENT ABOUT THE B-COMPAQ IFIX COMPARED TO THE GRAPHENE?
+ : Advanced SICT, protective closed shell design, rear facing level indicator, frontal easy adjust headrest, hardware ventilation, hidden push button adjuster
- : Not aircraft compatible, no storage pocket.
HOW DO I ADJUST THE HEADREST?
Loosen the harness and lift the lever on top of the headrest to easily adjust it to the preferred position.
IFIX
CAN YOU TELL ME MORE ABOUT ISOFIX INSTALLATION?
1. ISOFIX requires the user to apply tension to 2 ISOFLEX connectors + installation of top tether. Correct tensioning still requires additional force applied to the seat as well as multiple checks during installation.
2. The preferred position for rearward facing is in the centre seat of the vehicle. However, the majority of vehicles do not have ISOFIX anchorages in the centre seating area, therefore traditional seat belt installation should be used.
DO I NEED TO USE THE GATED BUCKLE TO SECURE MY B-COMPAQ IFIX?
All child restraints in the Australian market are required to pass Australian Standards without the use of gated buckles. Gated buckles can however be used to obtain a tighter fit to the vehicle if the preferred installation method is via the car seat belt (i.e not Isofix). B-Compaq ifix can be used with a gated buckle when installed with the vehicle seat belt.
CAN I USE A SEATBELT EXTENDER?
No. We do not advocate the use of aftermarket accessories other than Britax branded accessories. Should you have any issues with vehicle seat belt length we recommend seeing a professional installer.
MY SEAT IS FITTED FIRMLY, DO I NEED TO USE THE TOP TETHER?
Yes. You must always use the Top Tether. Refer to instruction Manual for an easy step by step guide.
ADVANCED SICT
THE SICT TOUCHES THE DOOR, IS THAT SAFE?
The SICT should be wound out fully but should not contact the door. If the SICT is contacting the door, simply wind it in to leave about 5 - 8mm clearance.
Why? When a car door is slammed shut it can travel past its intended ‘design’ closed position. This is called “over-travel”. If the SICT is wound out to make contact with the closed vehicle door, it is likely that if the car door is slammed it will come into contact with the SICT, potentially damaging the car door interior or leaving a mark on your child restraint.
THE SICT TOUCHES THE OTHER SEAT OR CHILD, IS THIS OK?
The SICT should only be wound out on the door side and should not interact with another passenger or another car seat.
DO I NEED SICTIF THE SEAT IS FITTED IN THE CENTRE POSITION?
No. This is what makes our B-Compaq ifix range so great and versatile.
Why? SICT is specifically designed to crumple on impact and disperse large amounts of energy at a controlled rate. These kindS of forces are only seen on the impact side of the vehicle so there is no need to deploy SICT unless it is adjacent a vehicle door.
IS B-COMPAQ IFIX SAFE IF I DON'T DEPLOY THE SICT?
Yes. The seat is certified with the Advanced SICT deployed and undeployed. For maximum protection unwind the SICT on the door side only.
WHAT IS CRUMPLE ZONE FEATURE?
Crumple Zone is a "crash" term. In a car it refers to the area of the car that crumples during an accident to help lower the crash forces during an impact. The Advanced SICT is designed to crumple and lower the crash forces that your child will feel in a side collision.
REARWARD FACING LEVELLING INDICATOR
WHY DO I HAVE TO HAVE REARWARD FACING LEVEL INDICATOR WITHIN RANGE?
When transporting newborn babies or younger children in rearward facing mode it’s important choose a seat angle that is optimised for your child’s needs. This range is specified by the AS/NZS 1754:2013 std. Too flat is not good in a frontal collision, too upright is not good for supporting your baby's head and neck whilst transporting them.
The level indicator offers you an optimal range when installing the B-Compaq ifix seat to your car.
THE ARROW IS NOT FULLY VISIBLE IN THE RANGE, IS THIS STILL OK?
The arrow should not be completely hidden in rearward facing mode. The tip of the arrow should be within the blue wedge.
CAN I ADJUST THE ANGLE OF MY SEAT TO A MORE LAYBACK POSITION?
Yes, as long as the arrow is within the blue wedge.
CAN I ADJUST THE ANGLE OF MY SEAT TO A MORE UPRIGHT POSITION?
Yes, as long as the arrow is within the blue wedge.
WHAT DO I DO IF I CAN'T ALIGN THE ARROW WITHIN THE BLUE WEDGE?
Adjust the angle until you can see part of the arrow.
ARE YOU ABLE TO FIT THIS "INDICATOR" TO ME CURRENT SEAT?
No.
I HAVE A REALLY SMALL BABY, CAN I USE AN ADDITONAL COMFORT INSERT?
Yes. This product has been tested with the Newborn Comfort Insert (also known as the UNITY NEWBORN INSERT) which is available as an accessory. You can comfortably use this stacked with your B-Compaq ifix Insert or on its own.
VENTILLATION ZONES
HOW DO THESE PROVIDE MORE COMFORT?
If your vehicle has rear air vents in the back seat, the cool air can flow through B-Compaq ifix ventilation zones offering more comfort to your child in rearward facing.
CLOSED SHELL DESIGN
HOW IS THE CLOSED PROTECTIVE SHELL SAFER?
The closed shell design provides enhanced shielding to ensure the child is contained within deeper side wings of the child seat. This creates an increased protective barrier between the child and the vehicle.
HOW DO I ACCESS THE INTERNAL HARNESS?
To access the yoke follow these steps;
1. Place the seat of a flat surface in a full upright position.
2. Press the harness adjuster button and raise the headrest to the highest setting.
3. Finally drop the head rest to the lowest setting. The Yoke should appear behind the seat base.